It's getting cold,RFIDLabel printer print is not clear how to do?
It doesn't matter. Move it to a warmer place, as long as it's above0Degree, it can come back to life. Turn off the printer, move the printer to a warm place, and then wait for it to return to temperature naturally. If the temperature changes too quickly, moisture may condense inside and outside the printer, so be careful to prevent condensation!
Suzhou Zhiguan Yisheng Information Technology Co., Ltd. has been committed to the Internet of Things since its inceptionRFIDResearch and implementation of industry application technology. For years of service1000+Home to all types of customers.
It's cooling down! It's cooling down! It's cooling down!
Customer sent questions:
RFIDLabel printer What if the print is not clear?
It's all the cooling! Remember,RFIDLabel printer The normal operating temperature of the print is :
5ºC - 40ºC
This year, there is a large cold wave across the country, if you see the red warning above the printer, please do not panic, it is notprinterBroken, just the printer tells you that it needs a warm working environment.
It doesn't matter. Move it to a warmer place, as long as it's above0Degree, it can come back to life. OffprinterMove the printer to a warm place and then wait for it to return to temperature naturally. If the temperature changes too quickly, moisture may condense inside and outside the printer, so be careful to prevent condensation!
But, but, but.
Have you saved your label?
Ordinary paper self-adhesive labels, affected by the moisture of the air will be damp, coupled with the result of the repeated action of temperature changes in the morning and evening, the viscosity will drop sharply in winter when the temperature is too low, in order to avoid the occurrence of non-stick, flying mark, warping and other problems. The suggestions are as follows:
1. The storage temperature of the self-adhesive material is15Degrees around or higher;2. If the transport or storage temperature is low (5Degree and below), please first place the material in15The degree is placed around the environment48After the glue is recovered, print or label it.
3. If you need to work in a frozen environment, select a special glue backed cryogenic label
Do a good job of protection, do a good job of keeping warm, I wish everyone's equipment safely through this winter.
ZEBRAPrinter operating temperature:0~40ºC
industryPDAproduct:-20~50ºC
Scanning gun products:0~50ºC(The above are general products)
Specially configured cold chain productsCan be at least in-30-50ºCNormal operation
moreRFIDFor products and solutions, please visit our website( www.ivesiot.com )Or online customer service (13771886689) Consultation
Prev : Hard RFID asset tag - Xintag
Why did the introductio...
The view of wisdom is e...
According to the statisti...